BCN3D printers
Uit Makerspace Haagse Hout
BCN3D SIGMA 3D printer[bewerken | brontekst bewerken]
Bij problemen met het printen van de sigma printer kun je de volgende pagina raadplegen: Troubleshooting BCN3D printer
PRINTER SPECS
- Architecture: IDEX
- Technology: Fused Filament Fabrication (FFF)
- Print Volume: 210mm x 297mm x 210mm
- Extruders: 2
- Nozzle diameter: Two 0.4mm hotends compatible with BCN3D hotends 0.3/0.4/0.5/0.6/0.8/1mm
- Heated Bed: PCB
- Screen: Full-Color Capacitive Touchscreen
- Electronics: BCN3D Electronics v1.0. and Independent Stepper Drivers
- Firmware: BCN3D Sigma – Marlin
- Supported files: gcode
- Operating Sound: 50 dBA
- Connectivity: SD Card, USB
- Certifications: CE / FCC
PRINTING PROPERTIES
- Layer Height: 0.05-.5mm (depending on the nozzle diameter)
- Positioning Resolution (X/Y/Z): 12.5 µm / 12.5 µm / 1 µm
- Operating Temperature: 15 ºC – 35 ºC
- Maximum extruder temperature: 290 ºC
- Maximum printing temperature: 280 ºC
- Maximum hot bed temperature: 100 ºC
- Support material: PVA for PLA /HIPS for ABS
MATERIALS
- Filament diameter: 2,85 ± 0.05 mm
- Compatible Materials: PLA, ABS, Nylon, PET-G, TPU, PVA, Composites, etc.
ELECTRICAL
- Input: AC 84-240V, AC 3,6-1,3A, 50-60Hz
- Output: 24V DC, 13A
- Power consumption: 240W
